25G-8TPS2-IB

25G-8TPS2-IB

4K HDBaseT Input Board

Part No: 9122 0067


HDBaseT™ and the HDBaseT Alliance logo
are trademarks of the HDBaseT Alliance.

Features:

  • HDMI 1.4 compliant video input over HDBaseT with a resolution of up to 4K / UHD (30Hz RGB or YCbCr 4:4:4, 60Hz YCbCr 4:2:0)
  • Pass-through of 4:2:0 3840x2160@60 Hz video input
  • Support for HDMI 1.4 embedded uncompressed LPCM audio or compressed high bitrate audio (LPCM, AC-3, MPEG1 Layer 1, MPEG1 Layer2, MPEG1 Layer 3, MPEG2, AAC, DTS, ATRAC, Dolby Digital+, DTS-HD, Dolby Digital TrueHD, DST, and WMA Pro, Dolby Digital EX, Dolby Digital Surround EX)
  • De-embedding of IEC-60958-1 (only stereo LPCM), and IEC-61937 (only AC-3, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES
  • Video test pattern generation
  • Cable length and link quality estimation
  • Frame detector functionality with frame rate, color space, pixel clock rate, and active and total area detection
  • HDCP 1.4 support
  • Deep color support for up to 36 bpp
  • Automatic Ethernet only mode support when an Ethernet only device is connected
  • Extension for up to 170 meters over CAT6a depending on the video clock used

Featuring eight HDBaseT 1.x input ports, the board is compatible with the full range of Lightware TPS extenders and HDBaseT compliant third party transmitters. The HDBaseT technology provides a transparent medium for all video, audio, data and control signals in line with the 25G multilayer architecture and allows for a cost effective extension solution for up to 170 meters.


25G-8TPS2-IB handles embedded audio in the HDMI substream of the HDBaseT signal and can de-embed 2-channel LPCM and various IEC 61937 audio formats from it to the Forward Audio Layer. Embedding of such audio streams from the Return Audio Layer to the HDMI signal is also supported. All audio options of the TPS2 input board are software-confi gurable on a per-port basis.

Supported Media Layers

  • Video layer with embedded audio
  • Forward Audio Layer
  • Return Audio Layer
  • Ethernet layer
  • USB KVM layer
  • Infra layer
  • Consumer Electronics Control layer
  • RS-232 & RS-422 control layer
 Specifications
 HDCP compliancy:  1.4
 HDBaseT compliance:  1.4
 Max Resolution:  4K / UHD (30Hz RGB or YCbCr 4:4:4, 60Hz YCbCr 4:2:0), 1080p@60Hz, 720p/1080i@120Hz
 Supported audio formats:  HDMI audio according to the Audio switching matrix section
 3D signal compatibility:  Frame packing, side-by-side, top-bottom
 Input cable equalization:  Up to 170 meters according to the maximum cable lengths section
 HDBaseT connectors:  8 x RJ45

 

Available video patterns:

video patterns 200px

Test pattern generator video formats:
480p, 576p, 720p, 1080p, 1080p deep color

 

Phisical Interfaces:

  • 8 RJ45 connectors
  • Link Status LED per connector
  • LED tower (Service, Control, Live and Power indicator)

 

Max cable lengths with the available firmware versions
 Resolution  Pixel clock rate Cable lengths (Auto / LR link mode)
CAT5e AWG24 CAT7 AWG26** CAT7 AWG23
 1024x768@60Hz 65 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1280x720p@60Hz 73,8 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1920x1080p@60Hz / 24bpp 148,5 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1920x1200@60Hz 152,9 MHz 100 m / NA 90 m / NA 120 m / NA
 1600x1200@60Hz 162 MHz 100 m / NA 90 m / NA 120 m / NA
 1920x1080@60Hz / 36bpp 223 MHz 70 m / NA 70 m / NA 100 m / NA
 3840x2160@30Hz UHD 297 MHz 70 m / NA 70 m / NA 100 m / NA
 4096x2160@30Hz 4K 297 MHz 70 m / NA 70 m / NA 100 m / NA

*with long reach firmware option. Long reach firmware supports pixel clock frequencies up to 148,5 MHz.
**Distances are 20% shorter if remote powering used. AWG 26 cables are not recommended with remote powering.

25G-8TPS2-IB 

Downloads
 product brief   CE DoC

Long reach mode

 

 

 

 
Join Our Newsletter
High fidelity signal management