HDMI-TPS-TX97, -RX97

HDMI-TPS-TX97, HDMI-TPS-RX97

TPS extenders for single CATx cable with Poe

 Part No: 9154 0023 (TX97), 9154 0024 (RX97)


HDBaseT™ and the HDBaseT Alliance logo
are trademarks of the HDBaseT Alliance. 
 

Highlight features

  • Single-Link DVI and HDMI extension supporting 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) and 3D capabilities
  • Extends Single-Link DVI or HDMI + Ethernet + RS-232 + IR over one CATx cable to up to 170m* transmission distance
  • 10/100 Ethernet transmission
  • Bi-directional RS-232 and IR
  • HDCP compliant, CEC, EDID transparent
  • Operation mode switch (Auto or forced Long Reach Mode)
  • IR out mode switch (Wired / Emitter)

 

HDMI-TPS-TX97 and HDMI-TPS-RX97 twisted pair HDBaseTTM extenders provide extension of uncompressed 4K/UHD video with embedded audio (up to eight channel PCM or HBR audio) for long distances over a single CATx cable. The unit offers bi-directional RS-232, IR, and Ethernet pass-through on the same CATx cable that carries the video signal. The TPS extenders support full HDCP and EDID compliance and work on all standard AV resolutions up to 4K and 48-bit color depth handling all standard audio formats and also 120 Hz 3D signals. PoE 48V remote powering is available through a single CATx cable, but a local power supply can also be used. All devices can be mounted on a rack shelf or used standalone.

The auto operation mode allows the device to detect the far end extender’s mode and adopt it. If the far end device is in Auto mode or it is a third party HDBaseTTM device the link will be set to HDBT mode. If the far device is in forced Long Reach Mode then the auto operation will set the Link to Long Reach Mode. The IR OUT can operate in either Wired (unmodulated) or Emitter (modulated) mode.

HDMI-TPS-TX97 and HDMI-TPS-RX97 are compatible with HDBaseT extenders and matrix switchers.

Applications

  • Post production studios
  • Control room
  • Digital Signage
  • Multiroom video
  • Conference rooms, collaborative telepresence

 

Features

  • DVI and HDMI extension over a single CAT7 cable
  • Two available operation modes to maximize potential cable length
  • Operation mode switch (Auto or forced Long reach mode)
  • Low power mode in Auto operation mode
  • 10/100 Ethernet extension
  • Bi-directional RS-232 pass-through
  • Bi-directional IR pass-through
  • Supports all DVI resolutions up to 1080p or 1920x1200
  • Supports all HDMI 1.4 resolutions
  • Compatible with 120 Hz 3D video signals
  • Remote powered through CATx cable
  • HDCP 2.2 compliant, CEC, EDID transparent
  • Uncompressed video/audio up to 10,2 Gbps
  • Live, Link detection, Video and HDCP detection LEDs
  • Rack mounting options
  • Locking DC connector

 

Specifications
Data rate: 3.4 Gbps per color
Resolution: All HDMI 1.4a resolutions supported
Equalization: Adaptive, automatic
EDID support: Transparent
HDCP pass through: Yes
Ethernet pass-through: Yes
RS-232 pass through: Yes
IR pass through: Yes
Power: Universal power adaptor, DC 12 V 2.5 A
Overall signal delay: 10µs (including 100m CATx cable)
Power consumption (-TX): 3.6 W (typ) 4.2 W (max)
Power consumption (-RX): 5.3 W (typ) 6.1 W (max)
Enclosure: 1 mm metal
Dimensions: 100.4 W x 100.4 D x 26 H mm
Weight: 330 g / product
Compliance: CE
Warranty: 3 years

 

Connectors
TX input, RX output: HDMI connector
TX output, RX input: RJ45 (TPS interface)
Ethernet: RJ45
IR In, out: 3.5mm TRS connector (1/8’’ mini-jack)
Serial port: 9-pole D-sub
Power: Locking DC connector (2.1 / 5.5 mm)

 

Max cable lengths with the available firmware versions
 Resolution  Pixel clock rate Cable lengths (Auto / LR link mode)
CAT5e AWG24 CAT7 AWG26** CAT7 AWG23
1024x768@60Hz 65 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
1280x720p@60Hz 73,8 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
1920x1080p@60Hz / 24bpp 148,5 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
1920x1200@60Hz 152,9 MHz 100 m / NA 90 m / NA 120 m / NA
1600x1200@60Hz 162 MHz 100 m / NA 90 m / NA 120 m / NA
1920x1080@60Hz / 36bpp 223 MHz 70 m / NA 70 m / NA 100 m / NA
3840x2160@30Hz UHD 297 MHz 70 m / NA 70 m / NA 100 m / NA
4096x2160@30Hz 4K 297 MHz 70 m / NA 70 m / NA 100 m / NA

*with long reach firmware option. Long reach firmware supports pixel clock frequencies up to 148,5 MHz.
**Distances are 20% shorter if remote powering used. AWG 26 cables are not recommended with remote powering.

HDMI-TPS 97front axo 200
Downloads
product brief front view
back view csg Quick Start Quide
cad cad drawing  
remote powering comtatibilityremote powering compatibility

Long reach mode

Standalone diagram

Port diagram

TPS-97 port-diagram 200

badge v1


Locking DC plug



twist 90° clockwise to lock


 Supplied accessory

Universal DC adaptor
Part No: 1180 0051

Wall power adaptor with interchangeable plug for international use.


IR transmitter-receiver pair

Part No: 1374 0003 TX, 1374 0002 RX

Supplied transmitter and receiver unit for IR extension.


Optional accessories

Under desk mounting kit
Part No: 5240 0275  

The UD-kit makes a single device easy to mount on any flat surface (e.g. furniture).

Under desk mounting kit double
Part No: 5240 0276 

The UD-kit double makes it easy to mount multiple devices on any flat surface (e.g. furniture).

Rack shelf
Part No: 5240 0935 

1U high rack shelf provides mounting holes for fastening four quarter-rack sized units. Pocket sized devices can also be fastened on the shelf.

 

 

 

   
 
Join Our Newsletter
High fidelity signal management