|DVI-OPT-TX220-Pro and DVI-OPT-RX220-Pro|
Lightware Visual Engineering introduces DVI-OPT-TX220-Pro and DVI-OPT-RX220-Pro Multimode Fiber cable extenders supporting DVI 1.0 compliant signals.
- Advanced EDID management
- Pixel Accurate Reclocking
- Zero frame-delay
- Front panel- and serial port control
- Remote powering feature also selectable for the receiver
- Several options for rack, furniture, or truss mounting
Designed for professional use, the Lightware DVI-OPT 220-Pro series extenders can transmit DVI-D signals over multimode fiber cables for up to 2600 meters distance. Using Single Fiber Technology the DVI-D signal is transmitted over one multimode 50/125 fiber core. Sources and display devices are galvanically isolated against ground loops and hum effects. The high resolution video content is transported without any latency or frame delay. The Neutrik OpticalCON fiber connectors ensure reliable operation in professional environments. These connectors are rugged, dust proof and very reliable, compatible with standard LC connectors.
The Advanced EDID Management feature makes it possible to emulate 100 EDIDs, 50 of which are factory preset and 50 user-programmable.
Cross compatibility between different Lightware fiber products is ensured not just via using the extenders in pairs, but the DVI-OPT-TX220-Pro and DVI-OPT-RX220-Pro offer interoperaility with Lightware’s hybrid modular matrix concept. Thanks to Lightware’s cross platform architecture the TX220/RX220 can be mixed with various combinations of I/O boards of the modular matrix series of Lightware. For example it is possible to connect these extender boxes directly to different Lightware matrices, using an MX-DVI-OPT series input or output board of the matrix family. This integrated solution is invaluable for AV professionals and system integrators.
Integrated system operation:
The receiver’s power source can be switched to use the built-in local AC power supply, or to receive power remotely from the transmitter through special hybrid fiber-copper cable (Neutrik 2M-4S75 only).
|Stand alone operation:
It offers easy mounting on truss systems.