MMX4x2-HT200

4x2 Matrix Switcher with TPS and HDMI Inputs and Breakaway Analog Audio

Part No: 9131 0035

 

HDBaseT_NEW.png

HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance 

 

Highlight Features

  • 4x2 HDMI matrix switcher with HDMI and TPS ports
  • Up to 170m cable compensation over TPS*
  • 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) and 3D capabilities
  • Fully HDCP compliant
  • Balanced analog audio input and output ports for audio embedding and de-embedding
  • Audio volume control on analog input and output
  • Advanced EDID management
  • Event Manager
  • RS-232, IR, Ethernet extension over TPS
  • RS-232, Ethernet, USB control options
  • Compact size
    * Depends on cable category and quality

MMX4x2-HT is a uniquely mini size matrix switcher. It has three HDMI inputs and one HDBaseTTM compatible TPS input port. It has two independent HDMI outputs. Audio can be de-embedded from the HDMI signal to a balanced 5-pole Phoenix (Euroblock) port and external audio signal can be embedded into the HDMI stream from another 5-pole Phoenix input port. The volume and gain properties of the audio signal can be modified at both input and output. The unit is fully 4K/UHD/3D capable and HDCP compliant. The device has a built-in Event Manager configurable via the Lightware Device Controller software. Further control options are served by the USB, RS-232, IR (in and out) and Ethernet ports.

Event Manager

The Event Manager is a smart, built-in feature in the Lightware HDBaseT compatible TPS extender family, the MODEX line and in some select matrix switchers like the MMX4x2 series units. The feature is available through the freely downloadable Lightware Device Controller software. The Event Manager was developed to handle tasks from the most simple to expert ones, like controlling the rolling shutter, the air conditioning system or the lights based on any condition changes on the media ports, such as a new source being connected or removed. Event Manager application is continuously updated with additional features via firmware upgrades: a delay can be added between the condition and the action and more actions can be triggered by a single condition change. With the help of the ‘condition count’ and ‘action test’ features, the predefined settings can be tested before going live. The system can recognize infrared commands which can also be set as conditions, and commands can also be sent via Ethernet.

Event Manager Wizard

Assigning an action to a condition is quick and easy with the Wizard function of Event Manager. The most typical examples of the currently selectable conditions and actions within the Event Manager Wizard are the following:

 Conditions  
 Video  Signal is detected on a port
 Video  Signal is not detected on a port
 Audio  Signal is detected on a port
 Audio  Signal is not detected on a port
 Audio  Signal type changes to 2 CH PCM
 Audio  Signal type changes to Multichannel PCM or Compressed
 Audio  Signal type changes to Undefined (no signal)
 IR  Infra code recognized
 General  TPS link state changes to Connected
 General  TPS link state changes to Disconnected

 

 Actions
 Ethernet  Send TCP command
 Ethernet  Send UDP command
 R232  Send RS232 message
 EDID  Switch EDID
 Audio  Set audio volume
 Audio  Mute output
 Audio  Unmute output
 Audio  Increase/decrease volume
 Video  Switch input to output
 Video  Enable autoselect on output
 Video  Disable autoselect on output
 Video  Load crosspoint preset
 Audio  Source select

 Applications

  • Classrooms
  • Conference and meeting rooms
  • Control room
  • Home cinema

Features

  • 4x2 Matrix Switcher with HDMI 1.4 and TPS ports
  • 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) and 3D capabilities
  • Video inputs: 1x HDBaseTTM Compatible TPS input, 3x HDMI 1.4 inputs
  • Video outputs: 2x HDMI 1.4 outputs
  • Audio ports: 1x 5-pole Phoenix connector for balanced analog audio embedding, 1x 5-pole Phoenix connector for balanced analog audio de-embedding
  • Analog audio volume control
  • Embedded 7.1 HBR audio support
  • Event Manager
  • Intuitive Control Software
  • Bi-directional RS-232, IR and Ethernet extension over TPS
  • Command injection on IR and RS-232 connections
  • Fully HDCP compliant
  • Advanced EDID Management
  • HDBaseTTM compatibility
  • Zero frame delay
  • Frame detector
  • Compact size
    * Depends on cable category and quality

Compatible Products

  • TPS Transmitters:
  • HDMI-TPS-TX95/97
  • DVI-HDCP-TPS-TX95/97
  • UMX-TPS-TX100 series
  • WP-UMX-TPS-TX100 series
  • SW4-TPS-TX240
  • HDMI-TPS-TX200 series
  • DP-TPS-TX200 series
  • MX Modular matrix frames - MX-TPS/TPS2-OB
  • 25G Modular matrix frames - 25G-TPS2-OB
  • Standalone TPS matrix frames – MMX6x2-HT series
Max Supported Cable Lengths
 Resolution  Pixel clock rate Cable lengths (Auto / LR link mode)
CAT5e AWG24 CAT7 AWG26** CAT7 AWG23
 1024x768@60Hz 65 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1280x720p@60Hz 73,8 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1920x1080p@60Hz / 24bpp 148,5 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1920x1200@60Hz 152,9 MHz 100 m / NA 90 m / NA 120 m / NA
 1600x1200@60Hz 162 MHz 100 m / NA 90 m / NA 120 m / NA
 1920x1080@60Hz / 36bpp 223 MHz 70 m / NA 70 m / NA 100 m / NA
 1920x1080@120Hz 297 MHz 70 m / NA 70 m / NA 100 m / NA
 3840x2160@30Hz UHD 297 MHz 70 m / NA 70 m / NA 100 m / NA
 4096x2160@30Hz 4K 297 MHz 70 m / NA 70 m / NA 100 m / NA

* with Long reach operation mode which supports pixel clock frequencies up to 148,5 MHz.

** when remote powering is used with AWG26 cables, distances are 20% shorter.

  

Connectors
Digital Video Inputs  4x HDMI connector
Digital Video Outputs  2x HDMI connector
Balanced audio input:  5-pole Phoenix (Euroblock) connector
Balanced audio output:   5-pole Phoenix (Euroblock) connector
Ethernet:  1 x RJ45
USB: mini-USB-B connector
IR in and out:  3.5 mm jack
Serial port:  3-pole Phoenix (Euroblock)
Power:  Locking DC connector (2.1 / 5.5 mm)

 

Specification
Resolution: Up to 4K UHD 3840×2160@30Hz,1600x-
1200@60Hz, FullHD 1920x1080@60Hz
Digital audio formats: Supports up to 8 channel PCM, Dolby TrueHD
and DTS-HD Master Audio 7.1 formats
Input cable equalization (TPS): Automatic max 170 m*
EDID emulation: Yes, Advanced EDID Management
EDID memory: 120 factory preset, 12 user programmable
HDCP compatibility: Yes
RS-232 pass-through Yes, configurable
RS-232 (control option): 9600, 19200, 38400, 57600, 115200 Baud
Rx,Tx (default: 57600)
Local power: DC Power supply 12V, 2A
Power consumption: 10W (max)
Enclosure: 1 mm metal
Dimensions: 221 W x 100.4 D x 26 H mm
Compliance: CE
Warranty: 3 years

  *Depends on cable category and quality

Analog Audio Input  
Volume: -96 .. 0 dB
Balance: -100 .. 0 .. 100
Mute function: Yes

 

Analog Audio Output  
Volume: -57 .. +3 dB
Balance: -100 .. 0 .. 100
Mute function: Yes

 

MMX4x2-HT200 front 200

MMX4x2-HT200 back 200

Downloads 
 product brief
 ce icon CE Doc
manual user manual cad drawing
 Event manager
csg quick start guide

event manager badge

Typical Application
mmx4x2-ht200 typical app 200px
Port Diagram

mmx4x2-ht200 port diagram 200px

 

   

 

 

BC stock

Join Our Newsletter
High fidelity signal management