MX-TPS-OB
TPS output board for HDMI, Ethernet, audio and control
MX‑TPS‑OB Output Board is a long‑distance single CAT HDBaseTTM solution with localized audio embedding and de‑embedding points.
Highlighted features
MX-TPS2-OB-P the 8 channel twisted pair output board provides HDMI 1.4, audio, Ethernet
and RS-232 transmission on a single CAT5/6/7 cable up to 100m in HDBaseTTM and 170m
distance in Long reach mode (maximal resolution is Full HD 1080p in Long reach mode).
Resolutions up to 4K and 48-bit color depth are handled with all standard audio formats as
well as 120Hz 3D signals. The board offers bi-directional RS-232 and Ethernet transmission
(each board has a 10/100 uplink connector for the Ethernet network connection) and remote
powering option for the TPS extenders available with the PoE add-on. The output board is
available with audio add-ons: digital S/PDIF or analog stereo connectors are available for
advanced audio functions (HDMI embedded audio signals are managed by the board).
The MX-TPS2-OB-P without the digital or analog audio option also handles HDMI embedded
audio. The board is compatible with deep color, Dolby TrueHD and DTS-HD audio and features
PCM audio sample rate conversion. Advanced professional functions such as HDCP enable/
disable mode, Pixel Accurate Reclocking, Advanced EDID Management and Frame Detector
are integrated providing the highest level of setup and usage.
Digital S/PDIF Audio Option:
- S/PDIF breakout for every port
- Bi-directional configurable S/PDIF connectors: audio can be de-embedded from the HDMI signals or audio can be embedded (or replaced) to the HDMI signal
- PoE compatible
- Remote powering on/off switching
- Status feedback
Analog Stereo Audio Option:
- Bi-directional configurable analog stereo port with 5-pole Phoenix connector
- Stereo PCM audio up to 96 kHz can be de-embedded from the HDMI signals
- Digitized audio (PCM 48 kHz) can be embedded (or replaced) to the HDMI signal
- Volume, gain control
- PoE compatible
- Remote powering on/off switching
- Status feedback
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Optional digital or analog audio embedding and de-embedding add-ons
- Adjustable analog audio settings (volume, gain, balance)
- Optional digital or analog audio embedding and de-embedding add-ons
- Extends DVI or HDMI 1.4 + Audio + Ethernet + RS-232 over one CAT5/6/7 cable
- Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
- Frame Detector (analyze detailed video timings)
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- TPS link quality and cable length monitoring
- HDBaseT compatible
- Ethernet extension (100 Mbps)
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Advanced EDID Management
- Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- Pixel Accurate Reclocking
- No video compression
- Bi-directional RS-232 extension (pass-through)
- HDCP 1.4 compliant
- Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
- Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Built-in video test pattern generator
- No signal latency, zero frame delay
Analog audio outputs | |
Volume: | -78 .. 0 dB |
Bass: | 0 .. 24 dB |
Treble: | 0 .. 6 dB |
Balance: | 0 .. 100% |
Phase invert: | On/Off |
De-emphasis: | On/Off |
Analog audio inputs | |
Volume: | -63 .. 0 dB |
Gain: | 0 .. 24 dB |
Balance: | 0 .. 100% |
Phase invert: | On/Off |
Specifications | |
HDCP compliancy: | yes |
Max resolution: | up to 4096x2160 |
3D signal compatibility: | frame packing, side-by-side, top-bottom |
Input connectors: | RJ45, S/PDIF, PHOENIX |
Power consumption (3.3 V): | 3,4A typ., 7,8 max. |
Power consumption (5 V): | 2,2A typ., 3,1 max. |
Calculated AC Power (W): | 22W typ., 41W max. |
Heat dissipation (BTU): | 75 typ., 139,89 max. |
Weight: | 925 g |
Max cable lengths with the available firmware versions | ||||
Resolution | Pixel clock rate | Cable lengths (Auto / LR link mode) | ||
CAT5e AWG24 | CAT7 AWG26** | CAT7 AWG23 | ||
1024x768@60Hz | 65 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
1280x720p@60Hz | 73,8 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
1920x1080p@60Hz / 24bpp | 148,5 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
1920x1200@60Hz | 152,9 MHz | 100 m / NA | 90 m / NA | 120 m / NA |
1600x1200@60Hz | 162 MHz | 100 m / NA | 90 m / NA | 120 m / NA |
1920x1080@60Hz / 36bpp | 223 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
3840x2160@30Hz UHD | 297 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
4096x2160@30Hz 4K | 297 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
*with long reach firmware option. Long reach firmware supports pixel clock frequencies up to 148,5 MHz. **Distances are 20% shorter if remote powering used. AWG 26 cables are not recommended with remote powering. |