VINX-110-HDMI-DEC

Coming soon
SKU
91810003

AV Over IP Scaling Multimedia Extender with USB KVM, RS232 and IR

VINX-110-HDMI-DEC is a LAN based decoder multimedia extender to extend HDMI video from a remote source to a local sink. 

VINX-110-HDMI-DEC is a LAN based decoder multimedia device to extend HDMI video from a remote source to a local sink. The VINX encoder and decoder devices connect either via a direct CATx cable connection, or through a Gigabit Ethernet Switch in between. The maximum delivery distance can reach up to 100 m with minimal latency and employing a quality, proprietary wavelet transform based image compression.

The maximum supported resolution is 3840 x 2160 @ 30Hz with 7.1 audio.

VINX devices support both static and dynamic (DHCP) IP address settings. 100 factory EDID presets and five user EDIDs are stored in the decoder. These units feature embedded web for control.

Front panel DIP switches serve quick manual setting for pairing  maximum 15 encoder devices to decoders over the network, a quick and easy installation advantage for digital signage applications. Gap and bezel compensation can be adjusted for video walls. Scaling is available on the decoder side and videos can be freely cropped. With the help of the VINX Video Wall Wizard, installation of a video wall can be reduced to one tenth of the usual time needed when using similar, third party products.  

Network Requirements

1Gb Ethernet network with Layer 3 switch (IGMPv2, IGMP Snooping, IGMP Fast Leave, Jumbo Frame Support, Multicast Filtering).

Highlight Features

  • 3840 x 2160 @ 30Hz resolution over a 1 Gigabit network with very low latency
  • Up to HDMI 2.0 4K 2160p@60Hz 4:2:0 Video Input supported
  • Audio supports LPCM and Dolby Digital /Dolby Digital Plus/DTS/ Dolby TruHD/DTS-HD bit stream
  • HDCP compliant
  • Local HDMI port for monitoring on the TX
  • Variable maximum bit rate (10 Mbps ~ 800 Mbps)
  • USB pass-thru for IP KVM application
  • LED feedbacks, DIP switches and physical buttons for quick and easy setup and operation
  • Embedded web control, direct and networked control via PC
  • The device can be controlled via Lightware’s proprietary LW3 protocol commands
  • Gap and bezel compensation for video wall applications, cropping adjustment capability, Video Wall Wizard
  • Output video signal scaling to adjust to sink properties

Recommended Applications

  • Shopping malls and video walls
  • Sports bars
  • Schools/universities
  • Server farms (KVM)
  • Corporate meeting rooms
  • Multiroom ocean cruisers
Specifications
Component type Decoder (Receiver)
Dimensions (L x W xH) 140 x 119 x 26 mm
AV Interface HDMI Female (Out)
USB Device Mni USB Type B
TX/RX Connector RJ45 Female
Switch 4 Position Dip Switch
IR 3.5 mm Jack Female
RS-232 RJ12 Female
Max. Image Resolution 3840 x 2160 @30Hz
Power Adapter DC 5V
Operation Temperature 0-40°C
Storage Temperature -20-60°C
Humidity 0-90% RH, Non-condensing
Weight 310g
Housing Metal Enclosure
Safety/Emission CE, FCC
Application Note Language File format Size Date  
VINX Gigabit Network Switch Requirements English pdf 1.18 MB 2017-09-28 Download
CE Language File format Size Date  
VINX-1x0-HDMI series CE declaration English pdf 0.03 MB 2017-11-27 Download
Product brief Language File format Size Date  
VINX-110-HDMI-DEC - Product brief English pdf 4 MB Download
Quick Start Guide Language File format Size Date  
VINX-1x0-HDMI_series Quick Start Guide English pdf 4.2 MB 2017-11-27 Download
Support Guide Language File format Size Date  
VINX FAQ English pdf 1.09 MB 2018-01-03 Download
User Manual Language File format Size Date  
VINX-1x0-HDMI_series User Manual English pdf 11.96 MB 2017-12-21 Download