MX2M-4OPTJ-OB
HDMI 2.0 Multimode Fiber Output Board
Highlighted features
- HDCP 2.3 and HDCP 1.4 support with cross conversion capabilities
- DisplayID support for forcing extreme formats (e.g. 7kx1k@60Hz 4:4:4) from the connected source
- Hot-swap support
- Extension distance of up to 600 meters for 4k@60Hz 4:4:4 signals and 2500 meters for full HD signals
- HDMI 2.0, HDMI 1.x, and DVI compatible
- Advanced EDID Management
- CEC support (command injection)
- Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- Uncompressed video up to 18 Gbps datarate (600 MHz pixel clock)
- No signal latency, zero frame delay
MX2M-4OPTJ-OB is a HDMI 2.0 compatible output board for the MX2M modular matrix family. The hot-swappable output board has four ports with optical SC connectors that can be connected to HDMI20-OPTJ-TX90 extenders.
Pass-through of embedded audio including uncompressed (LPCM, DSD), compressed (MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES) and HBR (Dolby Atmos, Dolby TrueHD, DTS-HD DA) formats.
Embedding of uncompressed (2-channel LPCM) and compressed (MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES) formats from the Audio Layer into the output HDMI stream.
All outputs are HDMI 2.0 compliant and can pass HDMI signals with a pixel clock frequency of up to 597 MHz over distances ranging between 600 meters (4K UHD) to 2500 meters (Full HD).
Advanced professional features of the board include HDCP conversion, support for signals with high dynamic range or unusual dimensions, Pixel Accurate Reclocking, EDID management, and chroma subsampling from 4:4:4 to 4:2:2.
The board can replace the audio in all four routed HDMI signals with compressed or LPCM audio streams from the Audio layer.
- HDCP 2.3 and HDCP 1.4 support with cross conversion capabilities
- DisplayID support for forcing extreme formats (e.g. 7kx1k@60Hz 4:4:4) from the connected source
- Hot-swap support
- Extension distance of up to 600 meters for 4k@60Hz 4:4:4 signals and 2500 meters for full HD signals
- HDMI 2.0, HDMI 1.x, and DVI compatible
- Advanced EDID Management
- CEC support (command injection)
- Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- Uncompressed video up to 18 Gbps datarate (600 MHz pixel clock)
- No signal latency, zero frame delay
Video | |
Resolution | Up to UHD/4k@60Hz 4:4:4 (with support for extreme formats e.g 7kx1k@60Hz 4:4:4) |
Signal Type | HDMI 2.0, HDMI 1.x, DVI |
Maximum data rate | 18 Gbps |
Maximum pixel clock | 600 MHz |
Content protections | HDCP 1.x, HDCP 2.2, HDCP 2.3 |
Connector type | 4x optical SC |
Video processing | Video parameter measurement, chroma subsampling to 4:2:2 |
Standards | HDMI 2.0, HDMI 1.4, DVI |
Audio | ||
Audio mode | Simultaneous pass-through and de-embedding to the Audio layer | |
Supported audio formats for pass-through | All HDMI2.0 audio formats | |
Supported audio formats for de-embedding | Uncompressed | LPCM (up to 2 channels, 192 kHz, 24 bits per sample) |
Compressed | MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digtal, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES | |
Compressed HBR | - |
General | ||
Powering | via MX2M frame | |
Power consumption (max) | 15,5 W | |
Thermal dissipation (max) | 52,9 BTU/hr | |
Weight | TBD | |
Operating conditions | Ambient temperature | 0-50oC |
Relative humidity | 0-90% (non-condensing) | |
Transportation conditions | Ambient temperature | -20-70oC |
Relative humidity | 0-95% (non-condensing) | |
Complience | EN 55032:2015 IEC 61000-3-3:2013+AMD1:2017 IEC 61000-3-2:2018 FCC CFR Title 47, Part 15, Subpart B CENELEC EN 60825-1:2014 FCC CFR Title 21, Chapter I, Subchapter J, Part 1040, Section 1040.10 |
|
Warranty | 3 years |