MX2M-4TPX-OB
SKU: 91130055
ShippingAVX (non switchable) HDMI 2.0 output board
Details
Extend and Integrate with AVX Technology
The MX2M-4TPX-OB board is Lightware’s newest development for the MX2M modular matrix family. Featuring four output ports with AVX technology the board is compatible with the full range of Lightware TPX receivers and SDVoE compliant 3rd party receiver devices. The AVX technology provides a transparent medium for all HDMI 2.0 video (up to a pixel clock frequency of 597 MHz), audio, Ethernet data and control signals in line with the MX2M multi layer architecture and allows for a cost effective extension solution for up to 100 meters.
Experience Seamless Matrix Switching
On each of its ports, the MX2M-4TPX-OB can embed 8-channel LPCM and various IEC 61937 audio formats from the Audio layer of the MX2M modular switcher.
The board also provides remote powering for attached extenders according to the PoE specification (IEEE 802.3af-2003) but with increased output power of 25.4W. Remote powering does not require an external power source.
Enable Control and Integration
Command injection for CEC, RS232, and IR, as well as the EDID management functionality are also among the features offered by the board, such as their connectivity and easy integration into a wide range of AV operations and with 3rd party devices, such as the Christie Terra projector.
Versatile Connectivity for Modern AV Needs
Seamless Integration for Large Systems
The MX2M series delivers modular 4K UHD matrix switchers, perfect for broadcast, control centers, and large installations. It ensures reliable routing and scalable, future-proof performance.
Specification Table
| Enclosure | |
| Rack mountable | No |
| Enclosure material | 1.5 mm steel |
| Dimensions in mm | 195.5 W x 219.5 D x 41.2 H |
| Dimensions in inch | 7.7 W x 8.6 D x 1.7 H |
| Weight | TBD |
| Power | |
| Power consumption (max) | TBD |
| Heat dissipation | TBD BTU/h (min), 120 BTU/h (max) |
| Power over Ethernet (PoE) | PoE remote powering of connected extenders according to IEEE802.3af |
| AVX output | |
| Connector type | RJ45 connector (x4) |
| Power over Ethernet (PoE) | yes (IEEE 802.3af) |
| Compliance | SDVoE |
| HDCP compliance | HDCP 2.3 |
| Transferred signals | Video, Audio, RS-232, Infrared, Ethernet |
| Color space | RGB, YCbCr |
| Video delay | 0.08 ms (for 1080p60) |
| Supported resolutions at 8 bits/color * | up to 4096x2048@60Hz (4:4:4) |
| up to 3840x2160@60Hz (4:4:4) | |
| Audio formats | 8 channel PCM, DSD |
| MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES | |
| Dolby Atmos, Dolby TrueHD, DTS-HD DA | |
* All standard VESA, CEA and other custom resolutions up to 600MHz (HDMI2.0) are supported.
| General | |
| Compliance | UL, CE |
| Electrical safety | IEC/EN/UL/CSA 62368-1:2014, Class II |
| EMC (emission) | IEC/EN 55032:2015 |
| EMC (immunity) | IEC/EN 55035:2017 |
| RoHS | EN 63000:2018 |
| Warranty | 3 years |
| Operating temperature | 0° to +50°C (+32° to +122°F) |
| Storage temperature | -30° to +80˚C (-22° to +176˚F) |
| Operating humidity | 10% to 90%, non-condensing |
| Cooling | through the matrix frame |
Features
HDCP 2.3 and HDCP 1.4 support
with cross conversion capabilities
Hot-swap support
Pass-through of audio
and de-embedding audio from the Audio layer including uncompressed or HBR formats
Extension distance of up to 100 meters
for 4k@60Hz 4:4:4 signals
HDMI 2.0, HDMI 1.x, and DVI compatible
Support for low-latency Dolby Vision
Less than 0.1 ms signal latency
Compatible with TPX extenders
and SDVoE based third party products
Advanced EDID Management
Command injection on RS-232 and IR ports
CEC support (command injection)
Supports HDMI 4K signal formats
4K UHD @60Hz RGB 4:4:4, up to 18 Gbps
Supports deep color signals
(24/30/36 bit RGB/YCbCr 4:4:4)
Compatible Devices
9 products
