Small, Rugged and Reliable: OPTJ Optical Extenders for HDMI 2.0

HDMI20-OPTJ-TX/RX90 optical extender pair set is a small, fully HDMI 2.0 compatible video extenders for distances of as long as 600 meters for Full 4K@60Hz 4:4:4 signals, and up to 2500 meters for Full HD resolution, with HDCP 2.2. HDR 10, 12 and Dolby Vision are also supported.


4K UHD
18 Gbps bandwidth
HDCP 2.2
HDR
HDMI 2.0
Zero frame delay
Plug & Play
3-year warranty (extendable to 5 years)

Dynamically changing environments, typically
rental and staging can greatly benefit from the
easy placement and rugged build.



Similarly, government enforcement
agencies in ad hoc operations with video
technology can also find easy placement,
rugged housing, and reliable, fault-free signal
extension advantageous.



Large commercial space areas can achieve
excellent, latency-free, brilliant video quality
in digital signing in the most distant areas
as well, while small size and the tough shell
provide easy placement.


Installers working with medical applications
also choose this device because it is easy to
place, easy to hide and due to its machined
metal chassis, it is easy to clean and disinfect.

Tough and Cool

These optical extenders have a
machined 
aluminium chassis, which is
very durable, while 
their surface can also
be kept clean easily, and also 
provides
excellent passive cooling to channel the 
operating heat.


Factory Installed Port Saver Cables

Fixed USB (for power feed) and HDMI cables of the HDMI20-OPTJ-TX/RX90 are actually built-in ‘port saver’ cables, firmly fixed, but with real connectors inside, so in case there’s need for a change at a later time, it is going to be an easy task, even performable by more expert endusers.

Dedicated Bumper for the Optical Port

A stub is protecting the optical connector against physical harm.

Hook and Loop Anywhere

Installation placement options are almost limitless: there are loops for hook-and-loop fasteners (commonly referred to as Velcros) in the chassis, so these extenders can be mounted to practically anywhere.

Reduced Cable Stress

The HDMI cable is unusually long, 80 cm*, which helps device placement and reduce strain on the cable.



Rack to Keep the Herd Together

Two threads on the long, narrow side of the extenders are for securing them into their specially designed power tray, which can accomodate up to 16 units, wich can be transmitters and receivers in any mix. While being used in the power tray, which also provides power to all installed devices, the feedback LEDs are mirrored on the front of the try. The power tray is available with various optical connectors.


Build an HDMI 2.0 Optical Matrix

In a configuration together with our MX2-8×8-HDMI20-Audio-L matrix switcher and with the use of a fully populated power tray, an HDMI 2.0 compatible optical  matrix router configuration can be built.


Informative LED Feedback

5-color feedback LED shows clear and useful information about the current state of signals within the extender.

OFF Module is not powered.
BLINKING (red) No fiber link detected.
BLINKING (yellow) No HDMI signal is detected.
BLINKING (green) Fiber link is established, signal is not HDCP-encrypted.
ON (green) Fiber link is established, signal is encrypted with HDCP 1.4
ON (blue)

Fiber link is established, signal is encrypted with HDCP 2.2

Specifications

HDCP 2.2 and 1.4 pass through:  Yes
EDID emulation:  Transparent EDID
HDR Modes:  HDR and Dolby Vision
RS-232 pass through:  No
Micro-USB B cable:  Power Feed and Firmware Upgrade
Cooling:  Passive
Power consumption (1080p60 / 4K60): TX 1,5 W / 2W | RX 0,8 W / 1W
Operating temperature:  0 to +50°C (+32 to +122°F)
Storage temperature:  -40 to +85°C (-38 to +185°F)
Operating humidity:  10% to 90%, non condensing
Material:  Aluminium
Enclosure dimension:  110,5 W x 35,5 D x 11x4 H (mm)
Weight:  130 g
Rack mountable:  Yes, with 1U high rack shelf
Lenght of pigtail HDMI cable:  800 mm *
Lenght of pigtail USB cable:  1000 mm

* Production of devices with the 250 mm fixed HDMI cable are being phased out, and the availability of the 800 mm long HDMI cable version is limited. Please inquire at your Lightware sales contact about the currently available versions.