High Fidelity Signal Management
Search

25G-8TPS2-A2P1-IB

Discontinued
SKU
91220071
Be the first to review this product

4K HDBaseT™ Input Board with Digital Audio and PoE

Featuring eight HDBaseT™ input ports, this board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant third party transmitters.

Our regional offices and dedicated AV experts are at your disposal and would happily assist you finding the most suitable solution for your AV project.

Simply choose your location and get in touch with your Lightware partner today.

Our dedicated Lightware experts are ready to discuss the needs of your AV projects!

HDBASET

Featuring eight HDBaseT™ 1.x input ports, the board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant third party transmitters. The HDBaseT™ technology provides a transparent medium for all video, audio, data and control signals in line with the 25G multilayer architecture and allows for a cost effective extension solution for up to 170 meters. The A2 add-on has bi-directional and confi gurable S/PDIF connectors. 2-channel LPCM or various IEC 61937 audio formats embedded in the HDMI input or from the Return Audio Layer can be switched to the S/PDIF output. Moreover, such audio streams through the S/PDIF input can be embedded into the HDMI signal or can be routed to the Forward Audio Layer. The board provides remote powering for extenders according to the PoE specifi cation (IEEE 802.3af-2003) but with increased output power of 25.4W. Remote powering does not require an external power source other than that of the 25G matrix switcher.

Supported Media Layers

  • Video layer with embedded audio
  • Forward Audio Layer
  • Return Audio Layer
  • Ethernet layer
  • USB KVM layer
  • Infra layer
  • Consumer Electronics Control layer
  • RS-232 & RS-422 control layer

Remote Powering Remote Power Compatibility Table

Check the remote power compatibilities and functionalities across our devices

  • 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
  • Built-in PoE injector* for remote powering extenders
  • Bidirectional S/PDIF audio ports
  • Audio de-embedding
  • Bidirectional S/PDIF audio ports
  • Optional digital or analog audio embedding and de-embedding add-ons
  • Audio embedding and de-embedding
  • Optional digital or analog audio embedding and de-embedding add-ons
  • Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
  • Frame Detector (analyze detailed video timings)
  • Built-in PoE power injector* for remote powering extenders
  • TPS link quality and cable length monitoring
  • HDCP enable/disable function on input
  • HDBaseT compatible
  • Ethernet extension (100 Mbps)
  • HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
  • Advanced EDID Management
  • Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
  • Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
  • Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
  • Pixel Accurate Reclocking
  • Bi-directional RS-232 extension (pass-through)
  • HDCP 1.4 compliant
  • Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
  • Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
  • Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
  • Built-in video test pattern generator
  • No signal latency, zero frame delay
Specifications
 HDCP compliancy:  1.4
 HDBaseT™ compliance:  1.4
 Max Resolution:  4K / UHD (30Hz RGB or YCbCr 4:4:4, 60Hz YCbCr 4:2:0), 1080p@60Hz, 720p/1080i@120Hz
 Supported audio formats:  HDMI audio according to the Audio switching matrix section
 3D signal compatibility:  Frame packing, side-by-side, top-bottom
 Input cable equalization:  Up to 170 meters according to the maximum cable lengths section
 HDBaseT™ connectors:  8 x RJ45
 Audio connectors:  8 x S/PDIF
PoE compliance:  IEEE 802.3af-2003 with output power of 25.5W
Max cable lengths with the available firmware versions
 Resolution  Pixel clock rate Cable lengths (Auto / LR link mode)
CAT5e AWG24 CAT7 AWG26** CAT7 AWG23
 1024x768@60Hz 65 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1280x720p@60Hz 73,8 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1920x1080p@60Hz / 24bpp 148,5 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1920x1200@60Hz 152,9 MHz 100 m / NA 90 m / NA 120 m / NA
 1600x1200@60Hz 162 MHz 100 m / NA 90 m / NA 120 m / NA
 1920x1080@60Hz / 36bpp 223 MHz 70 m / NA 70 m / NA 100 m / NA
 3840x2160@30Hz UHD 297 MHz 70 m / NA 70 m / NA 100 m / NA
 4096x2160@30Hz 4K 297 MHz 70 m / NA 70 m / NA 100 m / NA

*with long reach firmware option. Long reach firmware supports pixel clock frequencies up to 148,5 MHz.
**Distances are 20% shorter if remote powering used. AWG 26 cables are not recommended with remote powering.

{{ column.title }}  
{{ file.name }} {{ file.type }} {{ file.language }} {{ file.format }} {{ file.size }} {{ file.date }} Download HTML PDF