WP-UMX-TP-TX100-US
Twisted pair wallplate and floorbox transmitter
UMX‑TP‑TX100 is a versitale transmitter which provides analog and digital audio and video connectivity from a remote point over Dual CAT cable.
Highlight features
- Extends VGA, YPbPr, DVI and HDMI signals
- Accepts analog and digital audio signals
- Autoswitch and autosync function for video and audio inputs with priority
- HDCP compliant
- Adjustable analog audio settings
WP-UMX-TP-TX100 and FP-UMX-TP-TX100 are all-round, universal video and audio extenders designed to handle digital video, analog video, and audio signals e.g. VGA, YPbPr, RGB, DVI and HDMI 1.3 with analog stereo or even 7.1 HDMI embedded audio. Analog signals are converted to digital formats and digital or digitized analog audio is embedded in the video stream. Video, audio and remote power are carried over two twisted pair cables. The transmitter handles HDCP encryption and has an HDCP enable/disable function.
Using factory, custom or transparent EDID emulation the user can fix and lock EDID data on the transmitter’s input connector. Advanced EDID Management forces the required resolution from any VGA or HDMI laptop and fixes the output format conforming to the system performance. Control options available through compatible Lightware receivers which have serial RS-232 control port (e.g. HDMI-TP-RX100RA).
Cross compatibility between all the devices in the product series is ensured thanks to Lightware’s attentive design. The transmitter can be paired with any receiver without restriction. With Lightware’s Hybrid Modular Matrix concept, it is even possible to connect the WP-UMX-TP-TX100 or FP-UMX-TP-TX100 directly to the matrix router using an MX-HDMI-TP or MX-DVI-TP series input board.
Applications
- Executive boardrooms
- Conference rooms, collaborative telepresence
- Multiroom video and audio control
- Home theatre systems
Features
- Extends VGA, YPbPr, RGB, DVI and HDMI 1.3 signals
- Accepts analog stereo or even 7.1 HDMI embedded audio signals
- HDCP compliant
- Connectors: DVI-I and VGA for video, 2 x RCA for analog audio
- Autoswitch and autosync function for video and audio inputs with priority
- Audio embedding on output
- Max cable length of 65m (CAT7 SFTP)@1080p60, 40m (CAT5e UTP) @1080p60, 60m (CAT6 FTP) @1080p60
- All analog signals are converted to digital formats
- Auto select function for video and audio inputs
- Uncompressed video/audio up to 6.75 Gbps
- Input (video & audio) status LEDs
- Remote power source
- Easy, universal mounting
- Can be remote powered through CATx cable (12V)
- HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
- Autoselect modes to automatically switch video and audio (first detect, last detect, priority)
- HDCP enable/disable function on input
- HDCP 1.4 compliant
- No signal latency, zero frame delay
- Extends VGA, DVI, HDMI 1.3 and RS-232 signals over CAT5/6/7 cable
- DVI-I (Analog+Digital) input connection
- Adjustable analog audio settings (volume, gain, balance)
- Audio embedding (or replace original audio)
- Extension distance up to 65 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
- Cross compatible with TP series Lightware CATx extenders and I/O boards
- Advanced EDID Management over second CATx cable
- Digitizes VGA, YUV analog input formats and converts to HDMI or DVI
- Advanced EDID Management (50 Factory presets, 50 user programmable slots)
- Advanced EDID Management in transmitter
- Pixel Accurate Reclocking
- Uncompressed video up to 6.75 Gbps datarate (225 MHz pixel clock)
- Intuitive control software for device configuration
- Firmware upgrade through serial port
- Front panel buttons for crosspoint control
- Device control via RS-232
- No video compression
- 10 bit analog to digital conversion for interlaced and progressive video signals
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- Compatible with several standard floor boxes
| Specifications | |
| Data rate: | 6.75 Gbps (2.25 Gbps per color) |
| Resolution: | up to 1080p (HDTV) or 1920 x 1200 |
| Input cable equalization: | automatic max 20 m |
| EDID support: | 256 byte Extended EDID |
| HDCP pass through: | yes |
| VGA to digital conversion: | 0 µs delay |
| Front panel control: | yes |
| Power: | 12 V, powered from remote device through TP cables |
| Power consumption: | 3.2 W (typ), 4 W (max) |
| Dimensions: | see the table below |
| Weight: | see the table below |
| Compliance: | CE |
| Warranty: | 3 years |
| Connectors | |
| Digital/analog video input: | DVI-I connector |
| Analog video input: | VGA connector |
| Analog audio input: | L+R RCA (Analog Stereo) |
| TP output: | 2 x RJ45 |
| Analog audio input | |
| Volume: | -63 .. 0 dB |
| Gain: | 0 .. 24 dB |
| Balance: | 0 .. 100% |
| Phase invert: | On/Off |
| Product series comparison | ||||
| Product: | Product dimensions: | Box dimensions: | Weight: | Part No: |
| WP-UMX-TP-TX100-EU | 150 W x 80 H x 41.9 D mm | 2-gang; 45 D mm | 290 g | 9152 0024 |
| WP-UMX-TP-TX100-UK | 140 W x 80 H x 41.9 D mm | 2-gang; BS 4662; from 35 mm; 129 W x 68.3 H mm | 280 g | 9152 0025 |
| WP-UMX-TP-TX100-US | 115.9 W x 114.3 H x 41.9 D mm | 2-gang; B225R | 360 g | 9152 0026 |
| WP-UMX-TP-TX100-EUROMOD | 99.6 W x 49.6 H x 41.9 D mm | Euromod 100 W x 50 H mm | 200 g | 9152 0027 |
| FP-UMX-TP-TX100-GB3 | 134.5 W x 44.8 H x 41.9 D mm | GB3 P3; rectangular opening for a triple Modul 45 socket, L=147 mm |
170 g | 9152 0028 |
| FP-UMX-TP-TX100-LEGRAND | 112.6 W x 44.8 H x 41.9 D mm | Legrand 113 W x 45 H mm | 200 g | 9152 0029 |