DVI-HDCP-OPTM-RX90
Connector Size Multi-Mode Optical Extender
DVI-HDCP-OPTM-RX90 is a small Multi Mode DVI optical extender for HDMI 1.3 signals with HDCP, for ranges up to a 300 m. Video signals are transmitted over one Multimode 50/125 fiber cable. The reinforced housing and ports of these units assure operation safety and security.
DVI-HDCP-OPTM-RX90 is a DVI fiber receiver set for up to 300m distance transmission. Using Multimode Fiber Technology the DVI signals with HDCP encryption are transmitted over only one Multimode 50/125 fiber core. Sources and display devices both have galvanic isolation to avoid ground loops as well as humming effects. No delays occur in the signal, as the video image is transported without any frame latency. The OPTM-RX90 extender pair supports EDID pass-through allowing the video source to read video display device’s capability.
Pixel Accurate Reclocking is Lightware proprietary technology which provides exceptional signal regeneration capability. The circuitry cleans the signal from noise, skew and jitter which are caused by long cable runs and EMC incompatible devices.
OPTM-RX90 receivers always need a USB power supply. Recessed thumbscrews allow easy mounting directly to DVI-D sockets by hand, or by using a flatbladed screwdriver. It is very useful in space saving applications, where the connectors are at their closed quarters and can only be reached from the rear side. The massive solid metal casing provides excellent cooling and maximal reliability.
Applications
- Professional AV systems, conference rooms
- Fixed installations, Rental and Staging
- Digital signage
- Long distance lossless DVI signal transmission
- Ground loop isolation
Embedded Audio
- Supported: uncompressed: PCM, Multichannel PCM
compressed: DTS, Dolby Digital - Not supported: Dolby True HD, DTS-HD, DTS-HD Master Audio
- HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- No signal latency, zero frame delay
- Single Fiber Technology
- Extension distance up to 300 meters (with OM3 fiber, 1920x1080p60)
- Transparent EDID pass-through
- Pixel Accurate Reclocking
- No video compression
- Status LED for extension link detection
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- Micro USB powering
- Improved ESD protection
- Solid machined aluminum body
- DVI connector sized form factor
- Recessed (slotted) thumbscrews
- Extends DVI or HDMI 1.3 signals over one multimode fiber cable
| Connectors | |
| RX output: | 24 pole DVI-D plug |
| Fiber: | LC simplex |
| DC Power: | Micro-B USB |
| Specifications | |
| Data rate: | 6.75 Gbps (2.25 Gbps per color) |
| Resolution: | Up to 1920 x 1200 or 2048 x 1080 pixels |
| Video Delay: | 0 frames |
| HDCP pass through: | Yes |
| EDID emulation: | Transparent EDID |
| LED indicators: | Link status LEDs |
| RS-232 pass through: | No |
| Fiber: | OM3 50/125 Multimode fiber |
| Laser wavelengths: | 850, 1310 and 1550 nm |
| Laser class specifications: | Class 1M |
| Transmitter output OMA*: | -9 dBm (worst case) |
| Receiver OMA* sensitivity: | -16 dBm (worst case) |
| Optical loss budget: | 7 dB (worst case) |
| Transmission distance (using OM3 type fiber): | 300 m |
| Power: | from source or sink device through micro USB cable |
| Power consumption: | 1.9 W |
| Enclosure: | solid metal |
| Dimensions: | 40 W x 74 D x 15 H mm |
| Weight: | 80 g |
| Compliance: | CE |
| Warranty: | 3 years |