DVI-HDCP-OPTS-RX90
Connector Size DVI Optical Extender with HDCP
DVI-HDCP-OPTS-RX90 is a small Single Mode DVI optical extender for HDMI 1.3 signals with HDCP, for ranges up to a 10 Km. Video signals are transmitted over one Singlemode 9/125 fiber cable. The reinforced housing and ports of these units assure operation safety and security.
DVI-HDCP-OPTS-TX90 and DVI-HDCP-OPTS-RX90 pair is a DVI fiber transmitter / receiver set for up to 10 km transmission. Using Single Fiber Technology the DVI signal with HDCP encryption is transmitted over only one single mode 9/125 fiber core. Sources and display devices are galvanically isolated against ground loops and hum effects, and the video image is transported without frame latency.
Powered from DVI source the DVI-HDCP-OPTS-TX90 transmitter does not need external power adaptor simplifying system installation. Supports EDID pass-through for video source to read video display device’s capabilities.
Recessed thumbscrews allow easy mounting directly to the DVI receptacle using only fingers or a flat-blade screwdriver. This is most useful in space constraint applications, where the connectors are too close, and can be reached only from the rear side. Massive solid metal casing provides excellent cooling and maximum reliability.
Applications
- Professional AV systems, conference rooms
- Fixed installations, Rental and Staging
- Digital signage
- Long distance lossless DVI or HDMI signal transmission
- Ground loop isolation
- HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- No signal latency, zero frame delay
- Extends DVI or HDMI 1.3 signals over one singlemode fiber cable
- Single Fiber Technology
- Extension distance up to 10 kilometers (with OS1 fiber, 1920x1080p60)
- Transparent EDID pass-through
- No video compression
- 1920x1200 or 2048x1080 maximum resolution (165MHz)
- Status LED for extension link detection
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- Can be powered through DVI connector (TX only)
- Micro USB powering
- Improved ESD protection
- Solid machined aluminum body
- DVI connector sized form factor
- Recessed (slotted) thumbscrews
| Connectors | |
| RX output: | 24 pole DVI-D plug |
| Fiber: | LC simplex |
| DC Power: | micro USB |
| Specifications | |
| Data rate: | 6.75 Gbps (2.25 Gbps per color) |
| Resolution: | up to 1920 x 1200 or 2048 x 1080 pixels |
| Video Delay: | 0 frames |
| HDCP pass through: | Yes |
| EDID emulation: | transparent EDID |
| LED indicators: | Link status LEDs |
| RS-232 pass through: | no |
| Fiber: | 9/125 LC Singlemode |
| Laser wavelengths: | 1490, 1550 and 1310 nm |
| Laser class specifications: | Class 1M |
| Transmitter output OMA*: | -8 dBm (worst case) |
| Receiver OMA* sensitivity: | -17 dBm (worst case) |
| Optical loss budget: | 10 dB (worst case) |
| Transmission distance (using OS1 type fiber): | 10 km |
| Power: | from source or sink device through micro USB cable |
| Power consumption: | 0.8 W |
| Enclosure: | solid metal |
| Dimensions: | 40 W x 74 D x 15 H mm |
| Weight: | 80 g |
| Compliance: | CE |
| Warranty: | 3 years |