High Fidelity Signal Management
Search

DVI-HDCP-TPS-TX95

Discontinued
SKU
91540001
Be the first to review this product

TPS Extender for Single CATx Cable with HDCP 2.2

DVI‑HDCP‑TPS‑TX95 twisted pair HDBaseT™ extenders transfer uncompressed high resolution video signals over a single CATx cable.

Our regional offices and dedicated AV experts are at your disposal and would happily assist you finding the most suitable solution for your AV project.

Simply choose your location and get in touch with your Lightware partner today.

Our dedicated Lightware experts are ready to discuss the needs of your AV projects!

HDBASET

Lightware DVI-HDCP-TPS-RX95 twisted pair HDBaseT™ extenders transfer uncompressed Full-HD video to distances up to a range of 170 m (in Long Reach mode) over a single CATx cable. The unit offers bi-directional RS-232, IR, and Ethernet pass-through over a single CATx cable that carries the video signal. The TPS extenders support full HDCP 2.2 and EDID compliance, and work on all standard AV resolutions up to 4096x2130@30Hz and 48-bit color depth, handling all standard audio formats as well as 120 Hz 3D signals. Remote powering is available through the single CATx cable, but a local power supply can also be used. These devices can be mounted on a rack shelf or used standalone.

The Auto operation mode allows the device to detect the far-end extender’s mode and adopt it. If the far end device is in Auto mode or if it is a third party HDBaseT™ device, the link will be set to HDBT mode. If the far device is in forced Long Reach mode then the Auto operation will set the Link to Long Reach mode.

Applications

  • Post production studios
  • Control room
  • Digital Signage
  • Multiroom video
  • Conference rooms, collaborative telepresence

Remote Powering Remote Power Compatibility Table

Check the remote power compatibilities and functionalities across our devices

  • Can be remote powered through CATx cable (12V)
  • Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
  • Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
  • 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
  • HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
  • HDCP 2.2 compliant (transparent pass-through)
  • Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
  • No signal latency, zero frame delay
  • Selectable operation mode (Auto or forced Long Reach mode)
  • Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
  • Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
  • Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
  • HDBaseT compatible
  • Ethernet extension (100 Mbps)
  • Transparent EDID pass-through
  • Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
  • No video compression
  • Bi-directional RS-232 and IR extension (pass-through)
  • Status LEDs (Live, TPS link, signal and HDCP detect)
  • Twist-and-lock DC power connector
  • Low power mode (standby)
  • Local or remote (remote-send / remote-receive) power source
  • External universal power adaptor
  • Mounting options for rack, furniture or truss
  • Extends DVI or HDMI 1.4 + Audio + Ethernet + RS-232 + IR over one CAT5/6/7 cable
Specifications
Data rate: 3.4 Gbps per color
Resolution: All HDMI 1.4a resolutions supported
Equalization: adaptive, automatic
EDID support: transparent
HDCP pass-through: yes
Ethernet pass-through: yes
RS-232 pass-through: yes
IR pass-through: yes
Overall signal delay: 10µs (including 100m CATx cable)
Power: universal power adaptor, DC 12 V 2.5 A
Power consumption (-TX): 3.6 W (typ) 4.2 W (max)
Power consumption (-RX): 5.3 W (typ) 6.1 W (max)
Enclosure: 1 mm metal
Dimensions: 100.4 W x 100.4 D x 26 H mm
Net weight: 330 g / product
Compliance: CE
Warranty: 3 years

Connectors
TX input, RX output: DVI connector
TX output, RX input: RJ45 (TPS interface)
Ethernet: RJ45
IR in, out: 3.5 mm TRS connector (1/8'' mini-jack)
Serial port: 9-pole D-sub
Power: locking DC connector (2.1 / 5.5 mm)

Max cable lengths with the available firmware versions
Resolution Pixel clock rate Cable lengths (Auto / LR link mode)
CAT5e AWG24 CAT7 AWG26** CAT7 AWG23
1024x768@60Hz 65 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
1280x720p@60Hz 73,8 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
1920x1080p@60Hz / 24bpp 148,5 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
1920x1200@60Hz 152,9 MHz 100 m / NA 90 m / NA 120 m / NA
1600x1200@60Hz 162 MHz 100 m / NA 90 m / NA 120 m / NA
1920x1080@60Hz / 36bpp 223 MHz 70 m / NA 70 m / NA 100 m / NA
3840x2160@30Hz UHD 297 MHz 70 m / NA 70 m / NA 100 m / NA
4096x2160@30Hz 4K 297 MHz 70 m / NA 70 m / NA 100 m / NA
* with Long reach operation mode which supports pixel clock frequencies up to 148,5 MHz
** when remote powering is used with AWG26 cables, distances are 20% shorter.
{{ column.title }}  
{{ file.name }} {{ file.type }} {{ file.language }} {{ file.format }} {{ file.size }} {{ file.date }} Download HTML PDF