HDMI-TP-RX100RA
CAT5, CAT6 and CAT7 Twisted Pair HDMI receiver with S/PDIF Digital Audio Output connector
The HDMI‑TP‑RX100RA deep color receiver was designed to handle HDMI 1.3a or DVI signals over two CATx cables with or without HDCP encryption.
The HDMI-TP-RX100RA deep color receiver was designed to handle HDMI or DVI signals over two CAT5, CAT6 or CAT7 cables with or without HDCP encryption. HDMI-TP-RX100RA de-embeds digital audio from the HDMI stream and outputs via the S/PDIF connector.
Cross compatibility between all the devices in the product series is ensured thanks to Lightware’s attentive design. Any transmitter can be paired with any receiver without restriction. With Lightware’s Hybrid Modular Matrix concept, it is even possible to connect an extender box directly to the matrix router using an MX-HDMI-TP series output board.Power source can be set by jumper for local supply with plug-in adapter, or for remote supply through TP CATx cable. All devices can be mounted on a rack shelf, or used in standalone formats.
Pixel Accurate Reclocking: The reclocking engine utilized in our ‘pro’ series routers can be uniquely found in Lightware 100 series Twisted Pair receivers. The circuitry cleans the signal from noise and jitter ensuring a stable recovered digital signal on output with sharp transitions and accurate timing.
Equalization on the receiver’s RJ45 input connectors is available for both automatic adaptive or fine tunable manual operation. In manual mode the 25 turn trimpot allows the most accurate settings between 0 and 40dB values. This can help gain those extra few metres even at the highest 1080p resolution.
Applications
- Home theatre systems
- Digital Signage
- Training
- Simulation
- Conference rooms, collaborative telepresence
- Can be remote powered through CATx cable (12V)
- HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
- Bi-directional RS-232 extension (pass-through)
- HDCP 1.4 compliant
- No signal latency, zero frame delay
- Extends DVI or HDMI 1.3 signals over CAT5/6/7 cable
- S/PDIF de-embedded audio output
- S/PDIF de-embedded audio output
- Audio de-embedding
- Firmware upgrade through USB
- Extension distance up to 65 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
- Precise manual, or automatic adaptive CATx cable equalization adjustment
- Cross compatible with TP series Lightware CATx extenders and I/O boards
- Advanced EDID Management over second CATx cable
- Advanced EDID Management (50 Factory presets, 50 user programmable slots)
- Pixel Accurate Reclocking
- Uncompressed video up to 6.75 Gbps datarate (225 MHz pixel clock)
- Device control via USB
- No video compression
- 1920x1200 or 2048x1080 maximum resolution (165MHz)
- Twist-and-lock DC power connector
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- Local or remote (remote-send / remote-receive) power source (jumper selectable)
- External universal power adaptor
- Mounting options for rack, furniture or truss
- Metal enclosure
| Specifications | |
| Data rate: | 2.25 Gbps per color |
| Resolution: | 640 x 480 to 1920 x 1200 or 2048 x 1080 deep color |
| TP cable equalization: | 0-40 dB manual or automatic |
| EDID memory: | 1 factory, 9 user learned presets |
| EDID support: | 256 byte Extended EDID |
| Front panel control: | yes; EDID selector, EQ setting |
| HDCP pass through: | yes |
| RS-232 pass through: | yes |
| Power: | universal power adaptor, DC 12V 1 A |
| Power consumption: | 4 W (typ) 10 W (max) |
| Enclosure: | 1 mm metal |
| Dimensions: | 100.4 W x 67.6 D x 26 H mm |
| Net weight: | 230 gramms |
| Compliance: | CE |
| Warranty: | 3 years |
| Connectors | |
| Input: | Dual-RJ45 |
| Output: | HDMI |
| Audio Output: | S/PDIF (Digital) |
| RS-232: | 9-pole D-sub |
| USB: | mini USB-B female connector |
| Power: | locking DC connector (2.1 / 5.5 mm) |