4x2 Matrix Switcher with TPS and HDMI Inputs and Breakaway Analog Audio

Highlight Features

  • 4x2 HDMI matrix switcher with HDMI and TPS ports
  • Up to 170m cable compensation over TPS*
  • 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) and 3D capabilities
  • Fully HDCP compliant
  • Balanced analog audio input and output ports for audio embedding and de-embedding
  • Audio volume control on analog input and output
  • Advanced EDID management
  • Event Manager
  • RS-232, IR, Ethernet extension over TPS
  • RS-232, Ethernet, USB control options
  • Compact size
    * Depends on cable category and quality

MMX4x2-HT is a uniquely mini size matrix switcher. It has three HDMI inputs and one HDBaseTTM compatible TPS input port. It has two independent HDMI outputs. Audio can be de-embedded from the HDMI signal to a balanced 5-pole Phoenix (Euroblock) port and external audio signal can be embedded into the HDMI stream from another 5-pole Phoenix input port. The volume and gain properties of the audio signal can be modified at both input and output. The unit is fully 4K/UHD/3D capable and HDCP compliant. The device has a built-in Event Manager configurable via the Lightware Device Controller software. Further control options are served by the USB, RS-232, IR (in and out) and Ethernet ports.

Event Manager

The Event Manager is a smart, built-in feature in the Lightware HDBaseT compatible TPS extender family, the MODEX line and in some select matrix switchers like the MMX4x2 series units. The feature is available through the freely downloadable Lightware Device Controller software. The Event Manager was developed to handle tasks from the most simple to expert ones, like controlling the rolling shutter, the air conditioning system or the lights based on any condition changes on the media ports, such as a new source being connected or removed. Event Manager application is continuously updated with additional features via firmware upgrades: a delay can be added between the condition and the action and more actions can be triggered by a single condition change. With the help of the ‘condition count’ and ‘action test’ features, the predefined settings can be tested before going live. The system can recognize infrared commands which can also be set as conditions, and commands can also be sent via Ethernet.


  • Classrooms
  • Conference and meeting rooms
  • Control room
  • Home cinema


  • 4x2 Matrix Switcher with HDMI 1.4 and TPS ports
  • 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) and 3D capabilities
  • Video inputs: 1x HDBaseTTM Compatible TPS input, 3x HDMI 1.4 inputs
  • Video outputs: 2x HDMI 1.4 outputs
  • Audio ports: 1x 5-pole Phoenix connector for balanced analog audio embedding, 1x 5-pole Phoenix connector for balanced analog audio de-embedding
  • Analog audio volume control
  • Embedded 7.1 HBR audio support
  • Event Manager
  • Intuitive Control Software
  • Bi-directional RS-232, IR and Ethernet extension over TPS
  • Command injection on IR and RS-232 connections
  • Fully HDCP compliant
  • Advanced EDID Management
  • HDBaseTTM compatibility
  • Zero frame delay
  • Frame detector
  • Compact size
    * Depends on cable category and quality

Compatible Products

  • TPS Transmitters:
  • HDMI-TPS-TX95/97
  • DVI-HDCP-TPS-TX95/97
  • UMX-TPS-TX100 series
  • WP-UMX-TPS-TX100 series
  • SW4-TPS-TX240
  • HDMI-TPS-TX200 series
  • DP-TPS-TX200 series
  • MX Modular matrix frames - MX-TPS/TPS2-OB
  • 25G Modular matrix frames - 25G-TPS2-OB
  • Standalone TPS matrix frames – MMX6x2-HT series
Max Supported Cable Lengths
 Resolution  Pixel clock rate Cable lengths (Auto / LR link mode)
 1024x768@60Hz 65 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1280x720p@60Hz 73,8 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1920x1080p@60Hz / 24bpp 148,5 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
 1920x1200@60Hz 152,9 MHz 100 m / NA 90 m / NA 120 m / NA
 1600x1200@60Hz 162 MHz 100 m / NA 90 m / NA 120 m / NA
 1920x1080@60Hz / 36bpp 223 MHz 70 m / NA 70 m / NA 100 m / NA
 1920x1080@120Hz 297 MHz 70 m / NA 70 m / NA 100 m / NA
 3840x2160@30Hz UHD 297 MHz 70 m / NA 70 m / NA 100 m / NA
 4096x2160@30Hz 4K 297 MHz 70 m / NA 70 m / NA 100 m / NA
* with Long reach operation mode which supports pixel clock frequencies up to 148,5 MHz.
** when remote powering is used with AWG26 cables, distances are 20% shorter.

Digital Video Inputs  4x HDMI connector
Digital Video Outputs  2x HDMI connector
Balanced audio input:  5-pole Phoenix (Euroblock) connector
Balanced audio output:   5-pole Phoenix (Euroblock) connector
Ethernet:  1 x RJ45
USB: mini-USB-B connector
IR in and out:  3.5 mm jack
Serial port:  3-pole Phoenix (Euroblock)
Power:  Locking DC connector (2.1 / 5.5 mm)

Resolution: Up to 4K UHD 3840×2160@30Hz,1600x-
1200@60Hz, FullHD 1920x1080@60Hz
Digital audio formats: Supports up to 8 channel PCM, Dolby TrueHD
and DTS-HD Master Audio 7.1 formats
Input cable equalization (TPS): Automatic max 170 m*
EDID emulation: Yes, Advanced EDID Management
EDID memory: 120 factory preset, 12 user programmable
HDCP compatibility: Yes
RS-232 pass-through Yes, configurable
RS-232 (control option): 9600, 19200, 38400, 57600, 115200 Baud
Rx,Tx (default: 57600)
Local power: DC Power supply 12V, 2A
Power consumption: 10W (max)
Enclosure: 1 mm metal
Dimensions: 221 W x 100.4 D x 26 H mm
Compliance: CE
Warranty: 3 years
  *Depends on cable category and quality

Analog Audio Input  
Volume: -96 .. 0 dB
Balance: -100 .. 0 .. 100
Mute function: Yes

Analog Audio Output  
Volume: -57 .. +3 dB
Balance: -100 .. 0 .. 100
Mute function: Yes
CAD Language File format Size Date  
CAD - MMX4x2-HT200 English zip 0.66 MB 2017-09-05 Download
CE Language File format Size Date  
CE - MMX4x2-HT200 English pdf 0.03 MB 2017-09-05 Download
Product brief Language File format Size Date  
Product brief - MMX4x2-HT200 English pdf 4 MB 2017-09-05 Download
QSG Language File format Size Date  
QSG - MMX4x2-HT200 English pdf 3.14 MB 2017-09-05 Download
User manual Language File format Size Date  
User manual - MMX4x2-HT200 English pdf 17.59 MB 2017-09-05 Download