MX-DVI-OPT-IB-ST
Discontinued
SKU
91120016
Fiber optical Input board for Single-Link DVI-D signal extension
MX‑DVI‑OPT‑IB offers an extremely long, 2500m distance extension over a single Multimode fiber for Single‑Link DVI signals on eight channels.
MX-DVI-OPT-IB is a multimode fiber based Input board with 8 Inputs for Single-Link DVI signals. The board is available with Neutrik OpticalCON, -LC, -SC or -ST connectors. Each port converts an incoming fiber signal to DVI-D format. Single Fiber Technology ensures transmission of DVI-D signals over one multimode fiber core using multiple wavelengths.
Compatible products
Transmitters: | |
DVI-OPT-TX110 | |
DVI-OPT-RX220-Pro |
- Status LED for laser detection
- Extension distance up to 2500 meters (with OM3 fiber, 1920x1080p60)
- Cross compatible with OPT series Lightware fiber extenders and I/O boards
- No video compression
- No signal latency, zero frame delay
Specifications | |
HDCP compliancy: | no |
Max Resolution: | 1920x1200 or 2048x1080 |
Laser wavelengths (4 ch. CWDM): | 778 nm; 800 nm; 825 nm; 850 nm |
Power consumption (3.3 V): | 1.3 A (typical), 1.5 A (max.) |
Power consumption (5 V): | 0 A (typical), 0 A (max.) |
Calculated AC Power (W): | 6.1 (typical), 7.1 (max.) |
Heat dissipation (BTU): | 23 (typical), 26 (max.) |
Weight: | 1350 g |
Input connectors: | ST |
Maximum extension distances | ||||
OM1 | OM2 | OM3 | OM4 | |
(62,5/125) | (50/125) | (50/125) | (50/125) | |
1080p@60Hz 24 bpp | Not supported | 600 m | 1200 m | 2500 m |