MX-DVI-TP-OB
Twisted Pair Output board for DVI over CAT5...CAT7 cables
MX-DVI-TP-OB was designed to convert and transmit Single-Link digital DVI-D video signals over one CATx cable. Each port contains a Pixel Accurate Reclocking engine, a DVI-D to CATx converter and cable booster. The best performance will be achieved with CAT6a or CAT7 SFTP cables. Only the video content is extended and therefore no EDID, Hotplug or remote receiver powering is available with this board.
MX-DVI-TP-OB was designed to convert and transmit Single-Link digital DVI-D video signals over one CATx cable. Each port contains a Pixel Accurate Reclocking engine, a DVI-D to CATx converter and cable booster. The best performance will be achieved with CAT6a or CAT7 SFTP cables. Only the video content is extended and therefore no EDID, Hotplug or remote receiver powering is available with this board.
Compatible products
| Receivers: | |
| DVI-TP-RX100 | |
| DVI-HDCP-TP-RX50 | |
| DVI-HDCP-TP-RX100R | |
- Extends DVI signals over CAT5/6/7 cable with built-in converters
- Extension distance up to 65 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
- Cross compatible with TP series Lightware CATx extenders and I/O boards
- Pixel Accurate Reclocking
- No video compression
- No signal latency, zero frame delay
| Specifications | |
| HDCP compliancy: | no |
| Max Resolution: | 1920x1200 or 2048x1080 |
| Power consumption (3.3 V): | 4 A (typical), 5 A (max.) |
| Power consumption (5 V): | 0.1 A (typical), 0.2 A (max.) |
| Calculated AC Power (W): | 19.6 (typical), 25 (max.) |
| Heat dissipation (BTU): | 72 (typical), 92 (max.) |
| Weight: | 440 g |
| Output connectors: | RJ45 |