MX2-24x24-HDMI20-R
MX2-24x24-HDMI20 is a member of the HDMI 2.0 standalone matrix switcher family that supports uncompromised 4K UHD resolution at 60Hz 4:4:4. This device has an R type designation signifying a dual redundant power source with two, independent, rugged power connectors and reinforced RS-232 and Ethernet ports.
Highlighted features
- HDCP 2.2 and HDCP 1.4 compliant with cross conversion capabilities
- Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
- HDMI 2.0, HDMI 1.4 and DVI 1.0 compliant
- HDR and Low Latency Dolby Vision support
- High bitrate Audio Support including Dolby Atmos, TrueHD, DTS-HD
MX2-24x24-HDMI20 is a member of the HDMI 2.0 standalone matrix switcher family that supports uncompromised 4K UHD resolution at 60Hz 4:4:4.This device has an R type designation signifying a dual redundant power source with two, independent, rugged power connectors and reinforced RS-232 and Ethernet ports.
It has a huge number of input and output ports resulting in outstanding port density that makes it particularly suitable for rental and fix-install applications and for future-proof operation centers. It is a perfect choice for installations where a huge number of HDMI 2.0 compliant input and output ports are required.
This standalone product has 24 HDMI2.0 inputs and 24 HDMI2.0 outputs transmitting up to 4K at 60Hz in 4:4:4 format, while supporting 3D, Dolby TrueHD and DTS-HD Master Audio.
MX2 Model Name |
Full Set of Crosspoint Switch Buttons on Front |
Analog Audio I/O Ports |
Redundant Power and Reinforced Connectors |
- Front to back cooling airflow
- Built-in universal power supply
- HDCP 2.2 and HDCP 1.4 compliant with cross conversion capabilities
- HDCP enable/disable function on input
- Vista Spyder and Barco Encore compatibility
- Multiple TCP/IP connections
- Advanced EDID Management
- Save and reload full crosspoint configurations as preset
- Front panel LCD menu and buttons for crosspoint control
- Intuitive control software for device configuration
- Device control via Ethernet (TCP/IP), RS-232 and USB
- CEC support (command injection)
- Fully non-blocking switching architecture
- Built-in website for device configuration
- Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
- HDMI 2.0, HDMI 1.4 and DVI 1.0 compliant
- HDR and Low Latency Dolby Vision support
- Pixel Accurate Reclocking
- No video compression
- Redundant power supplies available
- Firmware upgrade through Ethernet
- High bitrate Audio Support including Dolby Atmos, TrueHD, DTS-HD
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Uncompressed video up to 18 Gbps datarate (600 MHz pixel clock)
- No signal latency, zero frame delay
Specification* | |
Routing | 24 input to 24 output, non blocking architecture |
Speed | 18 Gbps per port |
Resolution | Up to 4096x2160@60Hz at RGB or YCbCr 4:4:4 (up to 600MHz pixel clock) |
Height | 4RU |
Mounting | Rack mountable, removable rack ears |
* Specifications are subject to change without notice
Connectors | |
Power | 2x Neutrik Powercon True1, 110/220V |
Video inputs | 19-pole HDMI 2.0 |
Video outputs | 19-pole HDMI 2.0 |
Serial control | D-sub 9-pole |
Ethernet | Neutrik Ethercon |
USB | Mini USB B |